Zipwake Dynamic Trim Control System
Zipwake Dynamic Trim Control now available to customers throughout Malaysia, Singapore, Indonesia, Philippines, Thailand and Vietnam. Contact AMI Marine International for more information.
Now available with four unique interceptor types to provide maximum installation flexibility across a range of hull shapes and sizes.
The Dynamic Trim-Control System that is revolutionising the boat world. Featuring an advanced, intuitive control system and a stunning new innovative design, Zipwake delivers a more comfortable ride, better performance and improved fuel consumption – whatever the conditions. A Kit Box includes all parts needed to install a Dynamic Trim Control System with one pair of fast-acting interceptors.
Zipwake Features Include:
- Zipwake is a fully automatic and active trim control system.
- Dynamically eliminates uncomfortable and dangerous boat pitch and roll.
- Automatically minimizes wave resistance and saves fuel.
- Built-in quality, simplicity and easy expansion, yet affordable.
- 5-10 times faster than conventional trim tabs.
- Built-in GPS, 3D-Gyro and 3DAccelerometer.
- Four unique styles of interceptor available for hulls of all shapes and sizes
- Modular design allows for adding additional sets of interceptor for larger vessels
All in a box
A Kit Box includes all parts needed to install a Dynamic Trim Control System with one pair of fast-acting straight interceptors. There are four different Kit Boxes, one for each interceptor length.
Any base installation can be expanded with up to two extra pairs of Series S interceptors, thus allowing a total of six interceptors without any need for additional connectors or power supply.
|Weight||2.1 kg||2.8 kg||3.5 kg||4.0 kg|
|Model||IT450-S V13||IT450-S V16||IT450-S V19||IT450-S V22|
|Weight||3.2 kg||3.3 kg||3.4 kg||3.5 kg|
|Model||IT300-S CHINE P||IT300-S CHINE S||IT300-S INTER|
|Weight||2.2 kg||2.2 kg||2.4 kg|
|Length||300 (12) / 300 (12) mm (in)|
|Weight||2.4(5.3) kg (lbs)|
|Max Boat Speed||60 knots|
|Thru-Hull Cable Fitting||Concealed or above waterline|
|Supply Voltage||12–32 V DC|
|Power Consumption||25 W max (each servo motor)|
|Waterproof Rating||IP68, 5 m|
Smart Ride Controller Specifications
|Mounting||Flush or surface|
|Supply Voltage||12–32 V DC|
|Power Consumption||10 W max|
|Waterproof Rating||IP67 / IP64 (front/back)|
|Operating Temperature||–20° to +85°C (–4° to +185°F)|
Distribution Unit Specifications
|Supply Voltage||12 - 32 V DC|
|Power Consumption||0.1 W max|
|Protection Fuse||10 A ATO|
|Power Cable Length||4 m (13 ft), Diameter 9 mm (0.35 in), 12 AWG|
|Operating Temperature||-20° to +85°C (-4° to +185°F)|
|Storage Temperature||-40° to +90°C (-40° to +194°F)|
|Waterproof Rating||IP67 with cables and/or protective caps mounted|
|Oil resistance||Common engine fluids|
|Compliance||CE, FCC, SAEJ1171 Ignition Protected|
|Weight||1.0 kg (2.2 lbs) including the power cable|
"I've only been using my 300s Zipwakes for the last 900km, but have quickly found that there is no way I can manually adjust them as fast as when they are in auto mode. I was extremely hesitant at first, thinking I could trim boat better and wouldn't ever use them... especially in auto. There was no "port up", "port down", "starboard up" or starboard down" separate buttons, just simple roll left/right or roll up/down on the one dial.
I've found they are best just to leave in auto and let it do its own thing, regardless of traveling 6 knots or 40 knots.
With the boat in a heading lock, 3 guys can run from one side of the boat to the other and it correct itself near instantly.
It's no longer about levelling your hull out to keep the spray down it's an automatic comfort feature. Heading diagonally across 20 knot northerlies are safe, smooth and comfortable, as it keeps the hull dead flat. Heading into chop on the way home is no longer trim in and go as I can trim the motor to the most economical position, then in auto mode, adjust the nose down to force your own way home without sacrificing fuel economy.
There's no way I'd run anything other than Zipwake now as it's a creature comfort.. especially with cruise control and autopilot on!“
- Zipwake user and Navico Pro Staffer
1010130-ZIPWAKE Series S Product Specification R1L
2011297-ZIPWAKE Series S Installation Guide R1F
A Zipwake kit contains all the required components for installation.
- 3) Distribution Unit
- 4) Cables required for installation
Zipwake remote control cover
Zipwake Gimble for Smartride Remote Control
Here are some examples of Zipwake installations on Australian Boats, click here for the full Australian Zipwake Builder list
Nautic Star - South Australia
Custom Works – Darwin
Specmar - Queensland
Galant – South Australia